Dear readers, it takes countless hours to create content for this site and keep it up and running. I have followed your advice above to remove the screen inverter on my HP W as the sympton where my screen was working normally and then suddenly started to flicker and then whent black with the very faint image of windows still barely visible and an expternal monitor working perfectly normally. You can support this site. Oh here it the part number of the screen i bought: Hi IML Tech, thanks for a very useful guide. Before it went completely black he managed to get a picture every now and then by turning the laptop off, and then on again over and over.
|Date Added:||21 January 2006|
|File Size:||63.79 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Now the cable from the screen to the inverter does not fit. What can it be. Steve, I guess this could be a problem with the VGA port on your laptop.
So I think these problems could be connected to the external display issues, but I have no logs and found nothing in Google. Insert a piece of soft plastic I use a guitar pick between the display bezel and screen and slowly move it from left to right to release plastic latches securing the bezel.
Compaq p when it starts up i get lines on the display after a didplay time i get a dis;lay image around the edge. Oh also where would i be able to get a video cable for this?
Disassemble the display panel so you can access the back side of the LCD screen. Tell me more about your problem. You can see it on the last picture in this guide: This multicolored cord runs under the thin piece of metal and spot you place the key card in.
Does it output correct voltage? I reinstalled the Catalyst driver with the latest one, nothing changed.
” LCD Screen Display for HP Compaq p WSXGA | eBay
Sounds more like CCFL lamp failure. Unfortunately, there is not much you can do to fix this problem.
If you appreciate my work and find this information useful, please support this site. I have a problem with my hp p identical to the one in this youtube video: I have the same problem with a p and the screen going funny all the time. Hi, The internal screen works fine, but I have an external monitor with better quality.
How to open up display on HP Compaq 8510p 8510w
Unfortunately, the VGA port soldered directly to the motherboard. Dipslay you trying to connect to the external monitor because the internal screen failed? Before it went completely black he managed to get a picture every now and then by turning the laptop off, and then on again over and over.
All you have to do is lift up the bottom part of the bezel. Mark, I have heard of people putting graphic cards in the oven to fix solder problems, can you do that for a screen, or will the plastic display melt?
Sisplay, Compaq p when it starts up i get lines on the display after a short time i get a cloudy image around the edge. Most likely you displwy keep the inverter, but it looks like you need a new video cable. Oh here it the part number of the screen i bought: I would be greatful if you can tell me how to fix it.
I have heard of people putting graphic cards in the oven to fix solder problems, can you do that for a screen, or will the plastic display melt? Disp,ay have a HP compaq p. Apparently, it has bad solder joint somewhere on the controller board and when you move the screen, you make it work temporarily. My brother has a p where the screen is just black.
15.4″ LCD Screen Display for HP Compaq 8510p WSXGA
Looks like a problem with the LCD screen. Separate the inverter board from the display cover and unplug cables on both side of the inverter. The internal screen works fine, but I have an external monitor displya better quality. Mwewa Matipa, Did you test the power adapter?